Full Automatic Stick Insert Station
The automatic stick insert unit adopts advanced design concept and single-channel conveying method. It works by four steps “calibration - put - take - insert”.
In one cycle, calibration, put and insert are driven by the servo motor and put is driven by the cylinder. The insert step works by the clamp, which can prevent sawdust from falling into the product.
In one cycle, calibration, put and insert are driven by the servo motor and put is driven by the cylinder. The insert step works by the clamp, which can prevent sawdust from falling into the product.
-
Main Technical Parameters
S NO.
Parameter
Unit
Value
1
Model
18ROWS
2
Capacity
Beats/min
20
pcs/H
21600
3
Stick(L*H*W)
mm
2×9.8×93~140
4
Power Supply
Voltage
V
380
Frequency
HZ
50
Power
Calibration Servo motor
Kw
0.75
Put Servo motor
Kw
0.75
Turn over servo motor
kw
1.0
stick insert motor
Kw
1.0
Total power
Kw
4
5
Compressed air
Pressure
MPa
0.6~0.7
Air consumption
m³/min
0.5
Compressed air inlet connection
¢10pipe
6
Weight of machine
kg
400 Appox.
7
Dimension(L*W*H)
1800×1100×1200mm(18Rows)Stick Insert part
3000×1100×2000mm(18Rows) Whole machine